Need help?Do you have a question about the Arrma 4x4 3S BLX and is the answer not in the manual?
General| Motor Type | Brushless |
|---|---|
| Battery Type | LiPo |
| Drive System | 4WD |
| Scale | 1/10 |
| Motor Size | 3660 |
| ESC | BLX100 |
| Chassis Type | Molded Composite |
| Speed | 50+ mph (80+ km/h) |
| Battery Voltage | 11.1V (3S) |
| Suspension | Independent |
| Differential | Gear |
Lists the components and required items for the ARRMA 4x4 3S BLX Vehicle.
Instructions on how to detach the vehicle's body shell.
Step-by-step guide for inserting AA batteries into the transmitter.
Procedure for placing the charged battery into the RC vehicle.
Aligning the vehicle's front wheels to a straight, neutral position.
Guidance on how to hold and operate the Spektrum STX2 transmitter controls.
Explanation of throttle and steering functions for acceleration, braking, and reversing.
Steps for safely powering down the RC vehicle and transmitter.
Instructions on how to store the vehicle safely when not in use.
Details on voltage input, BEC output, and battery requirements for the ESC.
Procedure to calibrate the transmitter's throttle range with the ESC.
Setting battery modes and understanding ESC temperature protection features.
Details adjustable ESC settings for track or driving style.
Step-by-step guide to adjust ESC parameters using the set button.
Procedure to restore ESC to default factory settings.
Diagram and labels for the STX2 transmitter controls and features.
Explanation of steering trim, rate, and limiter functions.
Explanation of throttle trim, rate, and limiter functions.
Information on how the LED indicates transmitter battery status.
To Next Page
