8
WWW.ARRMA-RC.COM
Basic Maintenance
- For other maintenance guides please visit ARRMA-RC.com
Slipper Clutch Setup
The function of the slipper clutch is to protect the gearbox,
differential and motor from shocks and also to allow you to tune how
the torque from the motor 'comes-in' when you accelerate. After
running, if slipper clutch is too loose, tighten 1/4 turn.
Characteristics
Smoother power delivery, easier to control.
Quicker throttle response. If the car wheelies
too much, loosen the Slipper Clutch.
Slipper Clutch
Loosen
Tighten
Surface Type
Slippery
High Grip
Chassis Maintenance
•
Clean the car, paying special attention to the areas on the right
•
Ensure that drivetrain, suspension and steering are clean, free and lubricated
•
Check that all the screws are tight
•
Check tyre/wheel condition
Rag
Automotive
Brake Cleaner
or
Nitro Car
Cleaner
Brush
Oil Spray
To return to factory settings:
1. Fully tighten locknut clockwise.
2. Loosen 5 turns.
WARNING: A loose slipper will damage the friction pads.
If the slipper is too tight it may damage the transmission.
Post-Drive Checks
1
3
2
B.
Switch off
ARRMA ATX
transmitter
Remove
battery
WARNING: BATTERY
MAY BE HOT!
A.
Switch off
MEGA
ESC
Inspect car for
wear or damage -
adjust or replace as
necessary.
Visit ARRMA-RC.com
for guides and parts
information.
Support Info
At ARRMA we want you to love running your kit and make owning a high performance
RC as simple as possible. If you have any questions about running, maintaining, tuning or
repairing your ARRMA product there are three options for you to use to get help and advice.
Visit ARRMA-RC.com for support, parts and upgrades for your kit 'GO FOR IT' is the worldwide
owner's forum for ARRMA. Here you will fi nd other ARRMA owners, get help and advice on how
to get the best from your ARRMA product. If you can't fi nd what you're looking for then you can
always email us at support@ARRMA-RC.com 24hrs a day and we will do our best to help you
with your query.
ARRMA-RC.COM
GOFORIT-RC.COM
SUPPORT@ARRMA-RC.COM