Assembly InstructionsHarriet
12
Step 3: Cabinet Shell - Casters
Caster Clip
FIRST
Caster Insert
SECOND
Caster
THIRD
Caster Clip x5
Caster Insert
x5
Non-Locking Casters
x3
Locking Casters
x2
1. Place the Caster Clip.
2. Insert Caster Insert. Use
a wooden block or other
hard, flat item to protect the
Caster Insert and pound
into place with a hammer.
3. Use a rubber mallet
to pound the Caster
into place.
Flip the cabinet over so that it is up on its wheels.
You may need a friend to help you,but it is not required.
NOTE: Casters must be
installed in this order:
NOTE: Locking casters must be
installed at the front of the
cabinet as shown!
To Next Page
Loading...
