29
Step 16
B29
● Parts Needed For ●
Roof Trim
●●
●●
● 8482 Side Roof Trim (2)
1 Attach the side roof trim to the
lower end of the roof panels on each
side of the building using screws at
each panel overlap.
2 Using your thumb and index fin-
ger, overbend the bottom flange of
the side roof trim at the corner inward
enough so the right and left roof trim
caps fit onto right and left corners.
3 Fasten the roof trim caps to the
side trim using a screw.
4 Fasten the roof panel ribs, peak
caps and ridge cap together using
bolts and nuts.
Tuck Flange
Inward to Fit
Inside of
Roof Trim Cap
8482
STEP
4
STEP
1
STEP
2
STEP
3
Peak Cap
Roof Trim Cap
Side Roof Trim
8482
To Next Page
Loading...
