To Next PageTo Next Page
Need help?Do you have a question about the Arrow HM8667 and is the answer not in the manual?
Guidance on understanding the manual for successful construction.
Detailed steps for assembling the specific building model.
Importance of a level base and anchoring for building stability.
Instructions for verifying all necessary parts are present.
Advises selecting dry and calm weather conditions for assembly.
Recommends having two or more people for efficient building assembly.
Lists basic tools and materials required for building construction.
Guidance on choosing a level site with good drainage for placement.
Covers handling sharp edges, tool safety, child/pet exclusion, and wind assembly risks.
Instructions for cleaning, waxing, and touching up the building's exterior finish.
Advice on clearing snow and leaves from the roof to prevent damage.
Tips for maintaining door tracks and ensuring smooth sliding operation.
Guidance on using washers and periodically checking fasteners.
Recommendations for reducing condensation using a vapor barrier.
Includes washing part numbers and using silicone for seals.
Optional kits to increase roof protection against heavy snow accumulation.
Various options for securely anchoring the building to the ground.
Accessory for organizing tools, fitting inside storage buildings.
Optional kits providing a base system for the building's foundation.
Adds usable overhead space for storage or as a workbench.
Shelving accessories to help organize storage space within the building.
Details on using a pre-fabricated floor frame kit as a base.
Instructions and materials for constructing a custom wood base.
Guidance for preparing the site and pouring a concrete slab base.
Method for securing the building to wooden posts or structures.
Method for securing the building to a concrete slab or footing.
Parts required for assembling the floor frame components.
Reinforcing the main frame pieces for the rear wall.
Joining gables and supporting roof panels with beams.
Constructing the door track assembly for sliding doors.
Assembling the four corners of the floor frame and ensuring squareness.
Positioning and attaching rear and front corner panels to the floor frame.
Fastening wall angles and channels to the rear and side walls.
Attaching the main wall panels to the building's frame.
Reinforcing the door opening with jambs for structural integrity.
Attaching roof beam brackets to the gable end structures.
Fastening gables and braces to wall angles and door track supports.
Installing the main roof beam and additional roof beams.
Instructions for positioning and fastening the first roof panel.
Installing remaining roof panels and weather stripping along the ridge.
Installing the ridge cap and fastening lower panel ends to side wall angles.
Attaching side roof trim, roof trim caps, and securing panel ribs.
Assembling door components including handles, braces, and guides.
Instructions for installing and adjusting the building's doors.
Final instructions and reminder regarding securing the building.
Final instructions and reminder regarding the floor frame installation.
Information on the causes of rust and preventive measures for the building.
General| Brand | Arrow |
|---|---|
| Model | HM8667 |
| Category | Outdoor Storage |
| Language | English |
