To Next PageTo Next Page
Need help?Do you have a question about the Arrow tr550 and is the answer not in the manual?
Maintain a clean, well-lit area and keep bystanders away to prevent accidents.
Avoid exposing tools to moisture and ensure cords are in good condition to prevent shock.
Stay alert, dress properly, avoid loose clothing, and use appropriate safety equipment.
Secure workpiece, use correct tools, store properly, and service damaged tools.
Ensure all tool service is performed by qualified personnel using identical replacement parts.
Do not touch nozzle or melted glue (190°C/380°F) to prevent severe burns.
Hot tips can damage surfaces; use the support stand. Wear safety glasses with side shields.
Wear a face or dust mask during dusty operations to protect your lungs.
First use requires two sticks to fill the melt chamber. Allow 3-5 minutes for heating.
Fold support stand forward for use. Plug into a 110 volt AC outlet and wait for heat-up.
Learn bead gluing and snake pattern application for cartons, board, and foam.
Ideal for hobbies and general repairs, sets in 30-60 seconds. Available in various pack sizes.
Provides more time for alignment, sets in 90-120 seconds. Available in specific pack sizes.
Contact Arrow Fastener Co., LLC for service needs at the provided address and telephone number.
General
