Arroyo Instruments ComboSource 6300 Series - Page 4

Page 4 · 6300 Series ComboSource User’s Manual
What’s in the Box
Along with the ComboSource itself, a CD with electronic copies of this manual,
the Computer Interfacing Manual, and USB drivers are included. For USA
customers, a power cord is included. For non-USA customers, an IEC-60320-
C13 rated AC power cord must be provided.
Accessories
Arroyo Instruments also sells several accessories designed to work with the
ComboSource. These include:
 1220B LaserSource Cable, 4A, 2m
This cable has DB-9 male/female connectors for interfacing to the
LaserMount or other connectorized fixtures, and shielded twisted pair
conductors for improved modulation performance. A pigtailed version
of this cable, with tinned ends for soldering into custom solutions, is
available as p/n 1221B.
 1260B TECSource Cable, 5A, 2m
This cable has DB-15 male/female connectors for interfacing to the
LaserMount or other connectorized fixtures, and supports up to 5A of
TE current and connections for the fan interface. A pigtailed version of
this cable, with tinned ends for soldering into custom solutions, is
available as p/n 1261B.
 1401-RM-1 4300/5300/6300 Series 2U Rack Mount Kit, 1 unit
1401-RM-2 4300/5300/6300 Series 2U Rack Mount Kit, 2 units
For installing your instrument into a standard 19” rack. The 1401-RM-1
is used when installing a single instrument into a 2U rack space. For
mounting two instruments side-by-side, use the 1401-RM-2 rack mount
kit. A 1401-RM-1 cannot be converted to a 1401-RM-2, or vise versa,
so be sure to purchase the correct rack mount kit.
 1600 10kΩ Thermistor
Accurate to ±0.2°C.
 1200-NULL RS-232 NULL Cable, 2m
 1201 USB Cable, 3m