ARSEGAN Easybrew-30 - Maintenance and Troubleshooting; Cleaning and Care Procedures

Brouwmarkt BV, Markerkant 1111, 1316 AE Almere
www.braumarkt.com
Recipe/programme selection in Auto Mode
Cleaning and Care
• We advise urgently to clean the machine after every use. The dry ingredients may stick to the metal
and inside the pump.
• Use 5-10 litres of water of 60°C to rinse the machine for 15 minutes or more, until it is clean. Turn on
the pump during cleaning.
• Use only a soft cloth or soft scouring pad to clean the inside of the boiler. Do not use sharp metal
objects to remove residue.
• Make sure to clean any wort residue marks on the boiler base before using the device.
• Reverse flush the pump by connecting a hose to the curved pipe and a water tap. Open the water tap
next.
• Suitable cleaning products can be used (Fivestar PBW).
• Do not splash the electronic parts of the machine.
• The machine must not be immersed in water.
• When not in use, unplug it and store the machine in a dry place.
In BLANK PAGE, press POWER & TIMER simultaneously for 5 seconds. The recipe
selection mode is activated
Confirm your recipe selection with START/STOP to enter it into BLANK PAGE.
Do not switch off the machine!.
Press AUTO/PAUSE to edit the selected recipe. Edit
POWER/TIMER/TEMP settings or press START/STOP button to start the Easybrew.
To select a recipe, press “-” or “+” .