What to do if my ARSEGAN Easybrew-50 Brewing Systems display shows ERR-1?
If your ARSEGAN Brewing Systems display shows ERR-1, it indicates a low temperature warning because the temperature is lower than -20°C, or the sensor connector is loose. Open the underneath and check the sensor; reconnect it if it is loose.
What does ERR-2 mean on my ARSEGAN Brewing Systems display?
ERR-2 on your ARSEGAN Brewing Systems display means the temperature is higher than 120°C, indicating an overheat or boil-dry warning. It may also indicate a sensor failure, in which case, please contact your dealer for a replacement.
What to do if ingredients are stuck in the ARSEGAN Easybrew-50 Brewing Systems pump?
If ingredients are stuck in the ARSEGAN Brewing Systems pump, flush the pump by connecting a hose to the curve pipe or dismantle the pump to remove the ingredients.
Unit for controlling brewing process with a digital screen.
Stainless steel filter for preventing solids from entering the pump.
Procedure for the first use, including machine rinsing.
Guide to setting up brewing parameters manually via the controller.
Steps for configuring and running automated brewing programmes.
Instructions for the mashing and boiling stages of brewing.
Table of common problems and their recommended fixes.
General| Brand | ARSEGAN |
|---|---|
| Model | Easybrew-50 |
| Category | Brewing Systems |
| Language | English |
To Next Page
