Chapter 1. Supply features
saTECH TSB test blocks facilitate secondary testing load of any power system, allowing rapid
monitoring, insulation and testing of the field elements.
Today the Satech TSB range includes blocks of 14 test circuit: Satech TSB-14.
The Satech TSB-14 and TSB-14RC (Henceforth, TSB14 shall include both lines unless
otherwise specified).product line is formed by TSB-14 test blocks and associated TSB-14-P test
plug. They are supplied independently.
In the case of saTECH TSB-14 tests block, its corresponding package contains:
Kit of cabinet fixing screw
Kit of rear block connection screw.
Kit of earth connections screw.
Block tests saTECH TSB-14 of the requested model, with its corresponding front
cover
In the case of saTECH TSB-14-P tests block, its corresponding package contains:
saTECH TSB-14-P Test Plug
TSB-P Protector for transport
Instructions for Test Plug insertion and extraction
Kit (14 units) plug plastic covers that cover the full spectrum of contacts 1, 2, A
and B
The line of 14 circuits blocks and plugs in the range saTECH TSB, is available for installation in
horizontal and vertical positions respectively. The selection of each model is shown later in
other chapters of this manual.
To Next Page
Loading...