Need help?Do you have a question about the Arteche saTECH TSB-14 and is the answer not in the manual?
General| Category | Test Equipment |
|---|---|
| Type | Secondary injection test set |
| Display | LCD |
| Voltage Range | 0-300 V AC/DC |
| Number of Poles | 1 |
| Communication Interface | USB, Ethernet |
Explains the function and IP rating of the front cover for testing access.
Classifies circuits by function: trip, voltage, current, and contact types.
Details the step-by-step process for inserting the test plug into the block.
Describes the mechanism for securing and releasing the test plug to prevent accidental removal.
Explains how to perform signal injections using banana connectors via the test plug.
Outlines the procedure for safely removing the test plug from the block.
Details the mechanism for stabilizing values during plug extraction.
Explains the guides and system preventing incorrect connections during insertion.
Describes visual indicators on the plug for proper alignment with the block.
Details the use, identification, and types of banana plugs on the test plug.
Explains the purpose and recommended use of plastic covers for plugs.
Provides step-by-step instructions for test plug insertion and extraction.
Provides physical dimensions and weight information for the test blocks.
Shows the required panel cutout dimensions for installation.
Details options for mounting the test block horizontally or vertically.
Details specifications for connecting cables at the rear of the unit.
Explains the grounding requirements and procedure for the test block.
Specifies maximum and minimum dimensions for annular connectors.
Illustrates a practical wiring example for the test block.
To Next Page