ARTECO Everywhere 3.0 User Manual

ARTECO-EVERYWHERE 3.0
Pag. 10
V 3.0 – 23/06/20 Rev 1.0
Figure 4 – Functions
Email
From this screen, you can configure the Everywhere module for sending email notifications to one or more
email addresses.
In order to send email, it is necessary that the module is connected to the Internet. Then you must fill in
the various fields properly, according to the data provided by the ISP or you System Administrator.
Figure 5 – Email Settings

ARTECO Everywhere 3.0 Specifications

General

Brand	ARTECO
Model	Everywhere 3.0
Category	Controller
Language	English