Always refer to the PCS Procedure Guide for further instruction
Consumable
Components
Reagent Kit
• Blank Reagent Vials:
Standard Reagent Kits contain 12 vials pre-filled with
Blank Solution.
Bulk Reagent Kits contain 50 vials pre-filled with Blank
Solution.
• Sample Solutions:
Range 1: For pipette volumes 200 – 5000 µL
Range 2: For pipette volumes 50 – 199 µL
Range 3: For pipette volumes 10 – 49 µL
Range 4: For pipette volumes 2 – 9 µL
Range 5*: For pipette volumes 0.5 – 1.9 µL
Range 6*: For pipette volumes 0.1 – 0.49 µL
• Sample Aliquot Containers:
Use aliquot containers to hold Sample Solutions used
during calibration to avoid contamination of Sample
Solution bottle.
• Transfer Pipettes:
Plastic transfer pipettes are used to transfer Sample
Solution from the reagent bottle to the aliquot container.
• Calibration Standard:
CAL A vial is used to collect a zero reading for the
Instrument.
• Kit Inserts:
Declaration of Traceability
*Range 5 and 6 are sold separately.
Lot code card
PCS Quickstart-15A3179_PCS Quickstart 15A3179 Rev 4/3/13 2:02 PM Page 7
To Next Page
Loading...
