Need help?Do you have a question about the Artel PCS and is the answer not in the manual?
General| Brand | Artel |
|---|---|
| Model | PCS |
| Category | Test Equipment |
| Language | English |
Connect system, ensure reagent kit temperature matches instrument, and turn on.
Remove vials, switch off printer and instrument, and store reagents properly.
Explains the functions of the Power Switch and Paper Feed Switch on the printer.
Step-by-step guide on how to load thermal printer paper correctly.
Guidelines for storing reagent kits at room temperature and handling frozen reagents.
Instructions for cleaning vials with isopropyl alcohol before use to ensure accuracy.
Details of blank reagent vials, sample solutions, aliquot containers, and transfer pipettes.
Guidance on disposing of PCS reagents according to local, state, or federal regulations.
Initiates the pipette calibration procedure, including a temperature check and lot code entry.
Instructions for removing the cap and inserting the blank vial into the holder for calibration.
Input operator ID, pipette ID, and pipette volume for the calibration process.
Manages vial usage, checks remaining samples, and prompts for the first sample dispense.
Procedure for aspirating sample solution and dispensing it into the blank vial.
Instrument mixes, reads absorbance, and displays results for each sample dispensed.
Options to reprint results or delete data points from the completed calibration.
Options to continue calibration with the same vial or use a new vial when capacity is reached.
Navigating the menu to reach the Instrument Calibration prompt.
Initiates the instrument calibration process using the PCS Instrument Calibrator Kit.
Entering the lot code for the calibrator kit and identifying it as new or previously entered.
Step-by-step insertion of CAL A, CAL B, and subsequent calibrator vials as prompted.
To Next Page
