Need help?Do you have a question about the Artel PCS3 and is the answer not in the manual?
General| Brand | Artel |
|---|---|
| Model | PCS3 |
| Category | Laboratory Equipment |
| Language | English |
Detailed steps for connecting the instrument and printer to power and to each other.
Lists all components included in the standard reagent kit, including vials, solutions, and accessories.
Procedure for cleaning vials to ensure accurate results by removing fingerprints and smudges.
Steps for powering on the instrument and printer, system testing, and initial prompts.
Step-by-step guide for starting pipette calibration, including temperature checks and lot code entry.
Procedure for entering reagent lot codes and confirming data for calibration.
Process of instrument self-calibration, CAL A vial insertion, and zero check.
Detailed instructions on handling and inserting the blank reagent vial for calibration readings.
Steps for entering pipette identification and the volume to be tested.
Steps for preparing and pipetting sample solutions into the blank vial for calibration.
Procedures for dispensing sample solution into the blank vial and the instrument mixing process.
Steps for calibrating adjustable volume pipettes at multiple settings.
Explains the purpose and required conditions for using CAL A for instrument zeroing.
Steps to perform instrument calibration, including accessing the menu and responding to prompts.
Accessing system performance checks and diagnostic tests for troubleshooting.
A guide to identifying symptoms, probable causes, and corrective actions for instrument issues.
To Next Page
