Artel PCS3 - Setting Date; Setting Time

15A3356O 30
6.2 Setting Date
Access this option using the Setup Menu. (Refer to Section 6.1,
“Instrument Setup Menu.”)
Press YES at the prompt:
Setup Menu
Check/Set Date?
The following prompt will be displayed:
Correct Date? (Y/N)
mm/dd/yy
If the date displayed is correct, press YES.
If the date is incorrect, press NO and enter correct date.
6.3 Setting Time
Access this option using the Setup Menu. (Refer to Section 6.1,
“Instrument Setup Menu.”)
Press YES at the prompt:
Setup Menu
Check/Set Time?
The following prompt will be displayed:
Correct Time? (Y/N)
XX:XX
If the time displayed is correct, press YES.
If the time is incorrect, press NO and enter the correct time.
NOTE: The time is displayed in a 24 hour clock format (e.g., noon is 12:00, midnight is 24:00).