Artel MVS User Manual

Quick Start Guide
Multichannel Verification System

Artel MVS Specifications

General

Brand	Artel
Model	MVS
Category	Laboratory Equipment
Language	English

Summary

MVS System Components Overview

MVS Setup Instructions

Connecting System Components

Plate Reader Connection

Details on connecting the MVS Plate Reader to the power supply and USB hub.

Plate Shaker Connection

Instructions for connecting the MVS Plate Shaker via serial and USB adapters.

Computer and Bar Code Reader Connection

Connecting the portable computer to power and the MVS USB Hub, and the Bar Code Reader.

System Power Connection

Ensuring the power strip is properly connected to the power supply for all components.

Powering MVS System On and Off

Powering On the System

Steps to turn on the Plate Reader, Plate Shaker, and launch Data Manager software.

Powering Off the System

Procedure for shutting down the portable computer and the main system components.

Calibrating the Plate Reader

Initiating Plate Reader Calibration

Starting the calibration process via the File | Plate Reader Calibration menu option.

Scanning the Calibrator Plate Bar Code

Using the Bar Code Reader to scan the Calibrator Plate's unique identification code.

Checking Calibrator Plate for Contaminants

Inspecting calibrator cuvettes for bubbles and dirt before proceeding with readings.

Calibrator Plate Cleaning Recommendations

Guidelines for safely cleaning the Calibrator Plate using provided cleaning kit materials.

Reading the Calibrator Plate

Placing the Calibrator Plate on the reader and initiating the data acquisition process.

Measuring the Baseline Plate

Scanning the Baseline Solution Bar Code

Scanning the bar code for the Baseline Solution and the Verification Plate.

Filling and Shaking the Baseline Plate

Instructions for filling wells with Baseline Solution and shaking on the Plate Shaker.

Reading the Baseline Plate Data

Placing the prepared Baseline Plate on the reader and initiating data collection.

Liquid Handler Setup

Volume Verification Setup

Plate Layout Configuration

Setting up plate layouts, including specifying layout ID, channels, and plate type.

Adding Volume Verification Plate Layouts

Creating new layouts for volume verification, defining parameters like run status and heat map.

Dilution Verification Setup

Plate Layout Setup for Dilutions

Configuring plate layouts for serial dilution tests, including channels and plate type.

Adding Dilution Plate Layouts

Creating new layouts for dilution verification, specifying dilution ratios and tolerances.

Running a Verification Process

Starting Verification in Data Manager

Initiating a new verification from the MVS Data Manager main screen or toolbar.

Selecting Device for Verification

Choosing the liquid handler device to be tested or scanning its bar code.

Configuring Verification Setup

Selecting Plate Layout, Plate ID, and optionally alternative solutions for the verification.

Scanning Sample Solution Bar Code

Using the Bar Code Reader to scan the MVS Sample Solution bottle bar code.

Scanning Diluent Solution Bar Code

Scanning the MVS Diluent Solution bottle bar code when prompted by the software.

Scanning Verification Plate Bar Code

Scanning the bar code on the MVS Verification Plate for identification.

Running a Verification Process (Continued)

Scanning MVS Verification Plates Box Bar Code

Scanning the bar code on the MVS Verification Plates box for lot identification.

Filling and Shaking Verification Plates

Filling plates with specified solutions and placing them on the Plate Shaker.

Inserting Plate into Plate Reader

Placing the prepared plate onto the Plate Reader tray for data acquisition.

Alternative Solution Preparation

Using the Alternative Solution Helper

Utilizing software to determine preparation protocols for alternative solutions.

Alternative Solution Preparation (Continued)

Alternative Solution Volume Ranges by Plate Type

Table detailing supported volume ranges for different plate types and stock solutions.

Preparing the Alternative Solution

Steps for weighing and mixing MVS Stock Solution and solvent to create test solutions.

Alternative Solution Verification

Adding Alternative Solution to Library

Entering details for alternative solutions, including stock, density, and weights.

Batch Manager Function

Batch Verification Setup

Configuring a batch by adding Calibrator Plate, Baseline, and Verification items.

Calibrator Plate Batch Properties

Setting properties for Calibrator Plate items like data file, bar code, and file prompt.

Baseline Plate Batch Properties

Baseline Plate Setup

Configuring baseline plate properties, including type, data file, and bar code.

Verification Batch Properties

Setting verification properties like device ID, layout ID, and plate ID.

Saving and Running Batch Verifications

Saving the batch configuration and initiating the batch verification process.

Test Reports

Partial Test Report Details

Overview of information included in test reports, such as lot numbers and signatures.