EasyManua.ls Logo

Article SENO - Anti-Tip Restraint Installation; Anti-Tip Parts Inventory; Required Tools for Anti-Tip Installation; Important Safety Warnings

Article SENO
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
Install tip-over restraint provided.
Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
3
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
BRACKET 4
M4 × 20MM SCREW 4
M8 × 51MM PLUG 4
M6 × 70MM SCREW 4
STRAP 2
ANTI-TIP RESTRAINT INSTALLATION
Page 1 of 3
CABINET Anti-Tip Installation
WARNING!
Hardware (C/D) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
REQUIRED TOOL
8MM / 5/16" DRILL BIT

Related product manuals