EasyManua.ls Logo

ARTROMOT K4 - 6. Bill of material for service parts

ARTROMOT K4
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6.
Bill
of
material
for
service
parts
Position
Description
Ordernumber
Electronics
1.30 Power cord EU version 0.0034.118
Power cord USA version 0.0034.011
1.31 Hand held programming unit K4 with spiral cable SN > 10000 0.0031.400
1.32 Spiral cable for hand held programming unit 2.0037.035
1.33 Rubber mat 2.0031.235
1.34 Base plate complete 2.0031.005
1.35 Motor control K4 SN > 10000 2.0031.921
1.36 Distance piece 0.0031.017
1.39 Cable retainer 0.0031.003
1.40 Wire set 2.0031.036
1.41 Power supply electronics 0.0034.244
1.42 Wire set K3 K4 2.0032.139
1.43 Wire set hand held programming unit 2.0037.004
1.44 Nomex insolation paper 2.0031.239
1.45 Pan head screw DIN912M3x6
1.46 Wire set power connector 2.0038.017
1.47 Cable retainer 0.0013.118
1.48 Self –adhesive tie mounts 0.0013.001
1.49 Grounding connector 2.0034.358
1.50 Hex-nut DIN934M4vz
1.51 Serrated washer DIN6798AD4,3vz
1.53 Fuses holder 0.0034.246
1.54 Fuse 1 AT 0.0000.005
1.55 Grounding connector 0.0034.126
1.56 Grounding symbol 0.0038.058
1.57 Puffer 2.0031.238
1.58 Washer DIN125D4,3vz
1.59 Hexagon head screw DIN933M4x40vz
1.60 Head screw LIKOM4x8A2
1.61 Washer DIN125D4,3vz
1.62 Power switch (ON/OFF) with connection 0.0034.245
1.63 Holding clip 0.0031.004
1.64 Protection for hand held programming unit 0.0037.103
7