RAP-2WG Wireless Remote
Access Point
Installation Guide
www.arubanetworks.com
1344 Crossman Avenue
Sunnyvale, California 94089
Phone: 408.227.4500
Fax 408.227.4550
RAP-2WG Wireless Remote Access Point | Installation Guide
Part Number 0510577-03 | April 2009
Contacting Aruba Networks
Web Site Support
Main Site http://www.arubanetworks.com
Support Site https://support.arubanetworks.com
Software Licensing Site https://licensing.arubanetworks.com/login.php
Wireless Security Incident
Response Team (WSIRT)
http://www.arubanetworks.com/support/wsirt.php
Americas and APAC Support Email support@arubanetworks.com
EMEA Support Email emea.support@arubanetworks.com
WSIRT Email
Please email details of any security
problem found in an Aruba product.
wsirt@arubanetworks.com
Telephone Support
Aruba Corporate +1 (408) 227-4500
FAX +1 (408) 227-4550
Support
United States
Universal Free Phone Service Number (UIFN): Australia, Canada,
China, France, Germany, Hong Kong, Ireland, Israel, Japan, Korea,
Singapore, South Africa, Taiwan, and the UK
All Other Countries
800-WI-FI-LAN (800-943-4526)
+800-4WIFI-LAN (+800-49434-526)
+1 (408) 754-1200
Copyright
© 2009 Aruba Networks, Inc. AirWave
®
, Aruba Networks
®
, Aruba Mobility Management System
®
, Bluescanner,
For Wireless That Works
®
, Mobile Edge Architecture, People Move. Networks Must Follow., RFProtect
®
, The All
Wireless Workplace Is Now Open For Business, and The Mobile Edge Company
®
are trademarks of Aruba
Networks, Inc. All rights reserved. All other trademarks are the property of their respective owners.
Open Source Code
Certain Aruba products include Open Source software code developed by third parties, including software code
subject to the GNU General Public License ("GPL"), GNU Lesser General Public License ("LGPL"), or other Open
Source Licenses. The Open Source code used can be found at this site:
http://www.arubanetworks.com/open_source
Legal Notice
The use of Aruba Networks, Inc. switching platforms and software, by all individuals or corporations, to terminate
other vendors' VPN client devices constitutes complete acceptance of liability by that individual or corporation for
this action and indemnifies, in full, Aruba Networks, Inc. from any and all legal actions that might be taken against
it with respect to infringement of copyright on behalf of those vendors.
Warranty
This hardware product is protected by the standard Aruba warranty of one year parts/labor. For more information,
refer to the ARUBACARE SERVICE AND SUPPORT TERMS AND CONDITIONS.
Altering this device (such as painting it) voids the warranty.
Specifications
Mechanical
Device Dimensions (antenna stowed) (HxWxD):
z 100mm x 70mm x 26mm
z 3.9" x 2.8" x 1.0"
Device Weight:
z 0.2 lbs / 90 grams
Temperature:
z Operating: 0ºC to 40ºC (32ºF to 104ºF)
z Storage: -40ºC to 70ºC (-40ºF to 158ºF)
Relative Humidity:
z 15% to 95% non-condensing
Mounting:
z Built-in Wall Mount Slots
z Tabletop
Antenna:
z Integrated, detachable articulating tri-band antenna
Visual Status Indicators (LEDs):
z PWR: Power
z WLAN: Wireless LAN
z E0 (WAN/uplink)
z E1 (LAN/downlink)
z STATUS: Reports the RAP’s status
Electrical
Ethernet:
z 2 x 10/100 Base-T auto-sensing Ethernet RJ-45 Interface, MDI/MDX
z IEEE 802.3, IEEE 802.3u
Wireless LAN
Network Standards:
z IEEE 802.11b and IEEE 802.11g
Antenna Type:
z Screw-on, 802.11b/g omni-directional antenna
Antenna Gain:
z 1.5 dBi at 2.4GHz
Radio Technology:
z Orthogonal Frequency Division Multiplexing (OFDM)
z Direct Sequence Spread Spectrum (DSSS)
Radio Modulation Type:
z 802.11b - CCK, BPSK, QPSK
z 802.11g - CCK, BPSK, QPSK, OFDM
Media Access Control:
z CSMA/CA with ACK
Supported Frequency Bands 2.4GHz:
z 2.400 ~ 2.4835 GHz (Global), channels country specific
Supported Operating Channels:
Data Rates:
z 802.11b - 1, 2, 5.5, 11 Mbps per channel
z 802.11g - 6, 9, 12, 18, 24, 36, 48 and 54 Mbps per channel
Output Transmit Power:
z 802.11b: 18 dBm
z 802.11g: 17 dBm at 6 Mbps; 14 dBm at 54 Mbps
Miscellaneous Functionality
Maximum Clients:
z 128 concurrent client sessions
Radio Band Selection:
z Via Mobility Controller in software
Manageability:
z Management of all 802.11 parameters
z Network Wide AP Management via CLI, WEB GUI and SNMPv3
z Access Point Profiles, managed by Geographical Location, BSSID and Radio
Type
Encryption (AP and Mobility Controller):
z 40 bit / 64 bit / 128 bit / 152 bit WEP, TKIP, AES
Compliance
Aruba provides a multi-language document containing country-specific
restrictions and additional safety and regulatory information for all Aruba
hardware products. You can read or download this document, on our website at
www.arubanetworks.com/safety_addendum.
European Union RoHS
The Restriction on Hazardous Substances Directive (RoHS)
(2002/95/EC), which accompanies the WEEE Directive, bans
the use of heavy metals and brominated flame-retardants in
the manufacture of electrical and electronic equipment. Specifically, restricted
materials under the RoHS Directive are Lead (Including Solder used in PCB’s),
Cadmium, Mercury, Hexavalent Chromium, and Bromine.
Aruba declares compliance with the European Union (EU) WEEE Directive
(2002/96/EC). For more information on WEEE, refer to:
http://www.dti.gov.uk/sustainability/weee
China RoHS
Aruba products comply with China environmental declaration
requirements and are labeled with the “EFUP 50” label shown at
the left.
Disposal of the RAP-2WG
For the most current information about Global Environmental Compliance and
Aruba products, see our website at
www.arubanetworks.com/safety_addendum.
This product at end of life is subject to separate collection and
treatment in the EU Member States, Norway, and Switzerland, and
therefore is marked with the symbol shown at the left (crossed out
wheelie bin). The treatment applied at end of life of these products
in these countries shall comply with the applicable national laws
implementing Directive 2002/96EC on Waste of Electrical and Electronic
Equipment (WEEE).
The WEEE Directive 2002/96/EC and RoHS (Restriction of Hazardous
Substances) Directive 2002/95/EC sets collection, recycling and recovery targets
for various categories of electrical products and their waste.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
z Reorient or relocate the receiving antenna.
z Increase the separation between the equipment and receiver.
z Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
z Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-
limited to channels 1 through 11.
The availability of some specific channels and/or operational frequency bands
are country dependent and are firmware programmed at the factory to match the
intended destination. The firmware setting is not accessible by the end user.
Industry Canada Statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is
subject to the following two conditions:
1. This device may not cause interference and
2. This device must accept any interference, including interference that may
cause undesired operation of the device
This device has been designed to operate with an antenna having a maximum
gain of 1.5 dBi.
Antenna having a higher gain is strictly prohibited per regulations of Industry
Canada. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the EIRP is not more than required for successful
communication.
Warranty
Standard warranty - 1 year return to manufacturer
802.11b 802.11g
z US, Canada, Taiwan 11
z ETSI up to 13
z US, Canada, Taiwan 11
z ETSI up to 13
z Japan 13
To Previous Page
Loading...
