Aruba 303 Series User Manual (English)

To Next Page

Aruba 303 Series Campus Access Points

Installation Guide

Rev07 | May 2023 1

The Aruba 303 Series campus access points support IEEE802.11ac Wave 2, delivering high performance with the

MU-MIMO (Multi-User Multiple-Input, Multiple-Output) technology, while also supporting 802.11a/b/g /n wireless

services.

The 303 Series access points provide the following capabilities:

 IEEE 802.11a/b/g/n/ac operation as a wireless access point

 IEEE 802.11a/b/g/n/ac operation as a wireless air monitor

 Compatibility with IEEE 802.3af PoE

 Integrated Bluetooth Low Energy (BLE) radio

Package Contents

 303 Series Access Point

 Ceiling mount bracket (Spare: AP-220-MNT-C1 mount kit)

Hardware Overview

The following sections outline the hardware components of the 303 Series access points.

Figure 1 303 Series (front view)

Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including

the original packing materials. Use these materials to repack and return the unit to the supplier if needed.

System Status

Radio Status

Other manuals for Aruba 303 Series

Need help?

Do you have a question about the Aruba 303 Series and is the answer not in the manual?

General

Radio Configuration	2x2 MIMO
Ethernet Ports	1x 10/100/1000BASE-T Ethernet (RJ-45)
Operating Temperature	0°C to +40°C (+32°F to +104°F)
Wi-Fi Standards	802.11ac
Antenna Type	Integrated down-tilt omni-directional antennas
Power Options	802.3af PoE or DC power
Mounting	Wall, ceiling
Dimensions	150mm x 150mm x 40mm