Aruba 303H Series - User Manual

To Next Page

Aruba 303H Series Hospitality Access Points

Installation Guide

AP-303H-IG-01 | September 2017 1

The Aruba 303H Series access point is a high-performance dual-radio wireless device for hospitality and branch

deployments.

This access point use Multiple-Input, Multiple-Output (MIMO) technology to provide secure wireless connectivity

for both 2.4GHz 802.11 b/g/n and 5GHz 802.11 a/n/ac WiFi.

Alternatively, the wired Ethernet ports located on the bottom of the device allow users to connect to the device

directly when linked by an Ethernet cable.

The 303H Series access point can be attached to a standard single-gang wall box using the mount provided, or

converted into a desk-mounted remote access point for branch office deployments using the AP-303H-MNTD

mount kit (sold separately).

The 303H Series access point provides the following capabilities:

 IEEE 802.11a/b/g/n/ac operation as a wireless access point

 IEEE 802.11a/b/g/n/ac operation as a wireless air monitor

 Compatibility with IEEE 802.3af/at PoE

 Central management configuration

 Supports PoE-in (E0 port)/PoE-out (E3 port)

 Support for selected USB peripherals

 Integrated Bluetooth Low Energy (BLE) radio

Package Contents

 303H Series Access Point

 Single gang wall-box mounting bracket

 (2x) #6-32 slotted screws

 T8H Torx security screw

Hardware Overview

The following sections outline the hardware components of the 303H Series access point.

Figure 1 303H Series (front view)

Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including

the original packing materials. Use these materials to repack and return the unit to the supplier if needed.

PoE-PSE Status

Radio Status

System Status

Need help?

Do you have a question about the Aruba 303H Series and is the answer not in the manual?

Aruba 303H Series Specifications

General