Do you have a question about the Aruba AP-567 and is the answer not in the manual?
2.4 GHz | Yes |
---|---|
MIMO type | Multi User MIMO |
Modulation | 16-QAM, 64-QAM, 256-QAM, 1024-QAM, BPSK, CCK, QPSK |
Bluetooth version | 5.0 |
Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3at, IEEE 802.3az, IEEE 802.3bt |
Spread spectrum method | DSSS, OFDM, OFDMA |
Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
Maximum data transfer rate | 1774 Mbit/s |
Maximum data transfer rate (5 GHz) | 1200 Mbit/s |
Maximum data transfer rate (2.4 GHz) | 574 Mbit/s |
USB connector type | USB Type-C |
USB 2.0 ports quantity | 0 |
Ethernet LAN (RJ-45) ports | 1 |
Antenna type | Internal |
Antenna features | Integrated antenna |
Antenna direction type | Directional |
Antenna gain level (max) | 7 dBi |
Placement | Pole, Wall |
Product color | White |
Operating altitude | 0 - 3000 m |
Storage temperature (T-T) | -40 - 70 °C |
Operating temperature (T-T) | -40 - 55 °C |
Operating relative humidity (H-H) | 5 - 95 % |
Security algorithms | WPA2, WPA3 |
Width | 165 mm |
---|---|
Height | 110 mm |
Weight | 1090 g |
System status via LED color and state during boot up.
Details on Ethernet, USB console, and grounding points.
Supported PoE standards and operational restrictions.
How to reset the AP to factory defaults or control LEDs.
Procedure for properly grounding the device.
Steps for connecting the network cable securely.