AS MOTOR AS 26 2T User Manual

10
Control elements
1
2
3
5
4
Throttle lever (1)
With the accelerator lever, you change the
engine speed and thus control the engine
output.
1 2
1: Neutral position
2: Full throttle
Drive lever (2 )
With the drive lever, you switch the drive on
and off.
I
0
Drive on (I):
Press the lever towards
the handlebar and contin-
ue to hold.
Drive off (0):
Release the lever.
Engine brake lever (3)
The engine brake lever is a protection device.
When you release the lever, the engine shuts
down immediately, the blade comes to a
standstill within 7 seconds.
M
I
0
Blade/engine on (I):
Press the lever towards the
handlebar and continue to hold.
Blade/engine off (0):
Release the lever.
Lever for lateral adjustment of handlebar (4)
1. Release the eccentric tension lever.
2. Attention: Do not crush the Bowden cables
when pivoting the handlebar.
Swivel the handlebar to the side to the de-
sired position.
3. Clamp the handlebar with the eccentric
tension lever.
Lever for height adjustment of
handlebar (5)
1. Pull the tie rod (5) backwards and move the
guide bar to a position that is comfortable
to you.
Carburetor with choke and tickler
The choke (1) and the tickler (2) are required
for the cold engine start.
Opening the choke:
Turn clockwise to the
stop.
Closing the choke:
Turn anti-clockwise to the
stop.
2
1
Filling carburetor with
fuel:
Press the tickler briefly
until the fuel flow starts.
Fuel valve
1
2
1: Open
2: Closed

AS MOTOR AS 26 2T Specifications

General

Brand	AS MOTOR
Model	AS 26 2T
Category	Lawn Mower
Language	English