ASCEND X2 // PERFORMANCE 2 IN 1 TREADMILL AND WALKING PAD
7
ASSEMBLY INSTRUCTIONS
• Position the Box: Place the box in the
location where you intend to use the
treadmill. This will make the setup
process smoother.
• Open the Box: Carefully cut the tape
and open the box. Avoid using sharp
objects that might damage the
treadmill. Avoid damaging any part of
the box and its packaging.
• Remove Packaging Materials: Take
out all packaging materials and set
them aside. Keep the packaging for at
least 30 days in case you need to
return or move the treadmill.z
• Lift Out the Treadmill: With the help
of another person, gently lift the
treadmill out of the box and place it on
the floor.
• Safe lifting technique: Make sure you
squat down and keep your back
straight during lifts. Not respecting
these guidelines may lead to serious
injury.
UNPACKING THE ASCEND X2 // PERFORMANCE 2 IN 1 TREADMILL AND WALKING PAD
2 people
2 people
REPLACE
IMAGE
Lifting the treadmill out of the box requires
2 people. Do not do this step alone.
Place the box in the desired workout location,
near a wall outlet. Make sure to have 2 people
move the box for safety reasons.
To Next Page
Loading...