Page 8 Version 2.14 Maintenance and Service Manual
4.7 Documentation
After all previous mentioned checks are finished fill out the service plan.
You find the plan at the end of this manual (see chapter 16).
You should also write down the current hour counter and power blackout counter on the day of service.
To read this information please see chapter 8.3.
4.8 Tools required for maintenance
• Current analyser / measuring device (Multimeter)
• Set of TORX (star head) keys / screwdriver
• various screw drivers (magnetic)
• set of open ended wrenches
• slightly greasing stainless-steel spray
4.9 Inspection through elevator-inspector
In addition to the maintenance work carried out by service technicians the lift must be inspected once a year
by authorised elevator inspector. The inspector must be tasked by the operator.
In the course of the yearly inspection all safety equipment must be checked according to chapter 4.3.
! N O T E !
Only required if directed by national law!
To Next Page
Loading...
