Why Ascendor Stairlifts only use onboard control?
When the Ascendor Stairlift platform is open, it can only be operated via the onboard controls. The PLC menu must be reprogrammed by a service technician to change this setting.
What to do if an obstacle activates the contact tray on Ascendor PLG7 Stairlifts?
If an obstacle is activating the contact tray or access ramp of your Ascendor Stairlifts, remove the obstacle and ensure that the access ramp and contact tray can move freely.
How to park Ascendor PLG7 in a charging station?
If your Ascendor Stairlift is not parked in a charging station, use the UP or DOWN button to move it to a charging station.
What to do if Ascendor PLG7 have low batteries?
If the batteries of your Ascendor Stairlifts are empty or low, move the lift to a charging station using the UP or DOWN button.
What to do if an obstacle blocks Ascendor PLG7 Stairlifts?
If an obstacle is blocking the movement of the safety bar or platform on your Ascendor Stairlifts, remove the obstacle.
Why Ascendor Stairlifts show Fault D Onboard UP/DOWN travel controls permanently activated?
If your Ascendor Stairlift displays 'Fault D', it means the onboard UP/DOWN travel controls are permanently activated. Check if dirt or water is activating the sensor button and clean the button.
How to fix Fault 5 Safety bar manually opened on Ascendor Stairlifts?
If your Ascendor Stairlift displays 'Fault 5', it means the safety bar has been manually opened. Close the safety bar by pressing the UP or DOWN button.
What to do if Ascendor Stairlifts show Fault C Platform is still open?
If your Ascendor Stairlift displays 'Fault C', it means the platform is not completely closed. Press and hold the FOLD Platform button for at least 2 seconds to ensure the platform is fully closed.
What to do if the Emergency Stop or Emergency Brake is activated on Ascendor Stairlifts?
If the emergency stop button on your Ascendor Stairlift has been pushed, release it by turning the button to the left. If the emergency safety brake has been activated, use the emergency drive button to move the lift toward the upper station. After the safety catcher is activated, a technician must inspect and, if necessary, replace the device.
What to do if the onboard control button is activated at all times on Ascendor PLG7 Stairlifts?
Push the RESET button on the F1 fuse main switch.
Essential safety steps before commencing any maintenance or service operations.
Ensuring all safety equipment operates correctly as per specifications.
Checking mechanical components and software for proper operation.
Detailed service checks and maintenance for the platform stair lift.
Overview of the PLC's input and output status for failure analysis.
List and explanation of PLC input signals and their functions.
List and explanation of PLC output signals and their functions.
Parameters and settings for monitoring the platform motor's performance.
Step-by-step guide for disassembling the PLG7 safety catcher.
Instructions on how to reset the PLK8 safety catcher after activation.
General| Drive | Rack and pinion |
|---|---|
| Speed | 0.15 m/s |
| Power Supply | 24V DC |
| Foldable Arms | Yes |
| Foldable Footrest | Yes |
| Safety Belt | Yes |
| Battery Backup | Yes |
| Seat Width | 460mm |
| Control Type | Joystick |
| Track Length | Customizable |
To Next Page
