What to do if the Emergency Stop or Emergency Brake is activated on Ascendor Stairlifts?
If the emergency stop button on your Ascendor Stairlift has been pushed, release it by turning the button to the left. If the emergency safety brake has been activated, use the emergency drive button to move the lift toward the upper station. After the safety catcher is activated, a technician must inspect and, if necessary, replace the device.
How to release the emergency stop button on Ascendor PLG7?
If the emergency stop button on your Ascendor Stairlift has been pushed, release it by turning the button to the left.
What to do if the onboard control button is activated at all times on Ascendor PLG7 Stairlifts?
Push the RESET button on the F1 fuse main switch.
What to do if the safety catcher is activated on Ascendor PLG7?
If the safety catcher on your Ascendor Stairlift is activated, use the emergency drive button to move the lift towards the upper station. After activation, a technician must inspect and, if needed, replace the device.
How to completely close the platform on Ascendor Stairlifts?
If the platform of your Ascendor Stairlifts is not closed completely, press the 'fold platform' button for at least 2 seconds.
What to do if Ascendor PLG7 Stairlifts are too heavily loaded?
If your Ascendor Stairlift is too heavily loaded, reduce the weight on the platform.
How to close the safety bar on Ascendor PLG7?
If the safety bar on your Ascendor Stairlifts has been opened by hand, close it by pressing the UP or DOWN button.
What to do if an obstacle blocks Ascendor PLG7 Stairlifts?
If an obstacle is blocking the movement of the safety bar or platform on your Ascendor Stairlifts, remove the obstacle.
What to do if Ascendor PLG7 have low batteries?
If the batteries of your Ascendor Stairlifts are empty or low, move the lift to a charging station using the UP or DOWN button.
How to park Ascendor PLG7 in a charging station?
If your Ascendor Stairlift is not parked in a charging station, use the UP or DOWN button to move it to a charging station.
Essential safety steps before commencing any maintenance or service operations.
Ensuring all safety equipment operates correctly as per specifications.
Checking mechanical components and software for proper operation.
Detailed service checks and maintenance for the platform stair lift.
Overview of the PLC's input and output status for failure analysis.
List and explanation of PLC input signals and their functions.
List and explanation of PLC output signals and their functions.
Parameters and settings for monitoring the platform motor's performance.
Step-by-step guide for disassembling the PLG7 safety catcher.
Instructions on how to reset the PLK8 safety catcher after activation.
General| Drive | Rack and pinion |
|---|---|
| Speed | 0.15 m/s |
| Power Supply | 24V DC |
| Foldable Arms | Yes |
| Foldable Footrest | Yes |
| Safety Belt | Yes |
| Battery Backup | Yes |
| Seat Width | 460mm |
| Control Type | Joystick |
| Track Length | Customizable |
To Next Page
