Asco 8210 series - Page 4

50 Hanover Road, Florham Park, New Jersey 07932 www.ascovalve.com
Page 4 of 4 Form No.V5455R5
Torque Chart
Part Name Torque Value Inch-Pounds Torque Value Newton-Meters
Solenoid base sub-assembly 175 ± 25 19,8 ± 2,8
Bonnet screw 144 ± 15 16,3 ± 1,7
Figure 3. Series 8210 valve without solenoid (DC construction shown).
solenoid base
sub-assembly
valve body
bonnet gasket
Indicates Parts Supplied
In ASCO Rebuild Kits
housing
bonnet screw (4)
core/diaphragm
sub-assembly
body gasket
bleed hole
valve bonnet
wrenching flats
1/2 NPT conduit
connection
milled flats
for wrenching
Locate bleed hole in
core/diaphragm sub-assembly
directly over outlet. For 1 1/2
NPT construction locate bleed
hole 30 from valve outlet.
Special wrench supplied
For wrench kit only
order No. K168146-001
1 and 1 1/4 NPT brass
construction shown
in ASCO Rebuild Kit.