Need help?Do you have a question about the Asco 8314 Series and is the answer not in the manual?
General| Series | 8314 |
|---|---|
| Orifice Size | 1/8" to 1" |
| Operating Environment | Indoor/Outdoor |
| Function | Pilot-operated solenoid valve |
| Media | Air, Inert Gas |
| Pipe Size | 1/8" to 1" NPT (depending on model) |
| Port Size | 1/8" to 1" NPT (depending on model) |
| Weight | Varies depending on model and materials |
| Type | Pilot-operated solenoid valve |
Defines key terms used in the manual for ASCO solenoid valves in safety systems.
Lists and defines acronyms relevant to safety instrumented functions and ASCO products.
Explains the role of ASCO solenoid pilot valves in achieving a safe state within a SIF.
Details how to verify product suitability for expected environmental conditions.
Highlights checking material compatibility and air supply conditions for valve application.
Outlines requirements for FMEDA reports and SIL verification calculations.
Addresses manufacturer design process requirements for SIL 3 to ensure integrity against systematic errors.
Discusses the solenoid valve as a Type A device and its SIL capability with HFT.
Covers standard installation practices, environmental checks, and air filtration requirements.
Explains factors affecting solenoid pilot valve response time and user responsibility.
Details the objective and recommended steps for proof testing ASCO solenoids.
Describes automatic partial valve stroke testing and physical inspection for failure detection.
Addresses the assumed useful lifetime of solenoid valves and preventative maintenance.
Instructs users to report any detected failures compromising functional safety to ASCO.
Provides document revision, ECN number, and release status information.
To Next Page
