ASCOM D81 Quick Start Guide

www.ascom.us | 877-71ASCOM | PL-000047r1
Power On/Off, End Call/Function
Press Power/End key
to end call or
function. Power on/off with long press
Power/End key, press “Yes”.
Lock/Unlock Handset
Press Star key ( ), press “Lock/Unlock”
option shown on screen.
Answer Call & Send
Press Send key .
Make & Send Call
Dial number. Press Send key or “Call”
OR... Use Call List to redial: Press Send
key. Press “Call” to redial the selected
number.
Mute Ringer
Long press “Mute” button while handset is
idle. Music note with line thru indicates
muted handset. Note: pressing “Mute”
during call will mute your speech to the
2nd party.
Vibrate Setting
Press “Menu”, scroll to “Settings”(wrench
icon), “Select”. Scroll to “Sounds & Alerts”
“Select”. Scroll to “Vibrating Alert” “Select”.
Transfer
After 2 handsets are connected, press “R”
(2nd party on hold). Dial number of 3rd
party (speak if needed). Press “R” then “4”.
Call Waiting
During an active call, a beep indicates an
incoming call. Press R1 to end active call
and accept incoming call OR... Press R2
to keep both calls and toggle back and
forth (no conference option). DO NOT
press the End key, it will connect the two
callers and end your connection to them.
Press R1 to end active call.
Loudspeaker
Press “Loudspeaker Icon ” during a call.
Send Text Messages
Press “Menu”. Scroll to “Messaging ”
“Select”. Scroll to “Write New Message”
“Select” & write message. Press “Send”.
Enter handset number. Press “Send”. Note:
Space is 0 key. Press Star key to toggle
between upper/lower case and digits.
Find Stored Text Messages
Press Up scroll arrow ( ) OR... Press
“Menu”. Scroll to “Messaging”. Scroll to
“Inbox” “Select”.
Clean with any hospital approved saniwipes.
Handset typically configured to mimic wired desk phones e.g. 9 for outside line etc.

ASCOM D81 Specifications

General

Brand	ASCOM
Model	D81
Category	Handsets
Language	English