To Next PageTo Next Page
Need help?Do you have a question about the Ascon tecnologic Y39SE and is the answer not in the manual?
General| Brand | Ascon tecnologic |
|---|---|
| Model | Y39SE |
| Category | Controller |
| Language | English |
Overview of the digital controller's typical use in cooling applications.
Details the layout and functions of the controller's front panel components and keys.
Explains how to quickly set the desired temperature point for the controller.
Guides users through programming standard operational parameters for the controller.
Secures controller parameters using a password to prevent unauthorized changes.
Details accessing and programming parameters at a specific level, often requiring a password.
Restores controller parameters back to factory default settings.
Specifies the intended applications and environmental conditions for the instrument.
Provides instructions and recommendations for physically installing the instrument into a panel.
Details the wiring procedures and safety precautions for connecting the instrument electrically.
Switches the controller between active operation and standby mode.
Describes the two operating modes and how to select between them for energy saving.
Displays measurements, units, and calibration options.
Explains configuration and functionality of the instrument's digital input terminals.
Covers configuration options for relay outputs and internal buzzer.
Details the ON/OFF temperature regulation logic and its parameters.
Features to protect the compressor and manage delays during startup.
Methods and parameters for automatically initiating defrost cycles.
Instructions on how to manually trigger a defrost cycle using the instrument's controls.
Explains how defrost cycles are terminated, either by time or temperature.
Configures the display behavior during defrost cycles.
Details how evaporator fans are controlled based on temperature and defrost status.
Outlines alarm types, signaling methods, and configuration options.
Specifics on setting and managing high and low temperature alarms.
How to configure and respond to external alarm signals.
Details function and configuration for open door alarms, including output reactivation.
Explains how specific keys can be assigned alternative functions for control.
Lists and describes optional accessories that can be connected to the instrument.
Explains error codes and messages displayed by the instrument for troubleshooting.
Instructions for cleaning the instrument's exterior and interior components.
Details warranty period, conditions, and procedures for obtaining repairs.
Lists electrical specifications like voltage, frequency, power consumption, and output ratings.
Provides physical specifications including dimensions, weight, and mounting details.
Includes diagrams and measurements for panel installation and physical size.
Summarizes key operational capabilities like temperature control and defrost methods.
Explains the system for ordering specific configurations of the instrument.
