ascon XE Series - IDENTIFICATION OF MODEL; 1.1 Model Identification

1
Manuale XE inglese
Thank you for choosing an ASCON controller
The instruments of the XE series belong to the last generation of
microprocessor based controller, are universal, very powerful but
simple to use.
They are fitted with AUTO-TUNE, as aid for system start-up, and serial
communication for introduction into a distributed control network.
They are complete because all possible variables are always present.
Configuration of the instrument permits determination of the operating
mode according to the application required.
1 • IDENTIFICATION OF MODEL
Power supply
100…240 V 50/60 Hz
16 …28 V 50/60 Hz and 20…30 Vdc
Serial communication
20mA C.L. Std Ascon protocol
20mA C.L. Modbus/Jbus protocol
Auxiliary output Y3
None
Fitted
3
5
1
2
0
1
Model code
OPTIONS
A
B
C
XE -
A B C
1.1 Identification of model
None
0
Beginning and end of scaleConfiguration code
239.5
239.5