4
Manuale XE inglese
8888
____
8888
The value of measure X is expressed in engineering
units.
If above end of scale
If below beginning of scale
• In programmation: displays parameter values
• In configuration: displays the values of the 1
st
part
of the configuration code (see enclosed leaflet)
(green)
Displays the operating Set point value
• In programmation: displays the parameter codes
• In configuration: displays the index values of the 2
nd
part of the configuration code (see enclosed leaflet)
10
7.5
----
2 - Set point W
1 -Process
Variable (X) (green)
NUMERIC INDICATORS X, W
Lit with output Y1 “ON”
De-activated with continuous or dual action
discontinuous output
Lit with output
Y1 (heat) “ON”
Only for HEAT/COOL
time proportional
output control
Lit with output Y1F
(cool) “ON”
Lit with output Y2 “ON”
Lit with output Y3 “ON” (only with Y3 option)
De-activated with continuous or dual action
discontinuous output
3
2
1
3 - Output Y1 (red)
3a - Output Y1 (heat)
3b - Output Y1F (cool)
4 - Output Y2 (red)
5 - Output Y3 (red)
LEDS FOR OUTPUT STATE
239.5
239.5
2 • FUNCTION OF KEYS AND DISPLAYS
To Next Page
Loading...
