2.
Press and hold the SELECT/ENTER button on the unit to automatically search for the
available stations. After finished, all the searched sations will be stored in Preset list, and
the first station will start to play.
FM OPERATION
10
3.
You can also press or repeatedly to fine adjust the frequency, then store the specifyed
station at this frequency to the PRESET list as follows:
1. Press and hold PRESET button to open Preset Store list.
1.
Press MODE button to make the unit switch to FM mode.
4.
Press INFO button to display the relative information about the played station and program.
Press the PRESET button to display the "Preset Recall" list, then press the or
button to select the desired preset station, press the SELECT/ENTER to confirm.
Press the SELECT/ENTER to confirm.
2. Press the or button to select the desired storing location.
3.
Before FM operation, please completely extend the telescopic antenna, or adjust the position
of the unit or the antenna for maximum signal strength.
To Next Page
Loading...
