R20 SIZE D 1. 5V x 3
Powering Your Radio
Using the Power Adapter (included)
Using Battery Power
1. Plug the AC6V power adapter (included) into the AC power input on the side of your radio.
2. Plug the other end of the power cord into an outlet.
Requires 3 size D batteries (not included).
1. Pull the battery compartment tab down and lift up to open battery cover.
2. Insert 3 size D batteries (not included) into the battery compartment. Make sure the batteries are correctly
aligned, as shown in the figure.
WARNING: DO NOT, CHARGE
THE RADIO WHILE IT IS USING
BATTERY POWER, TAKE ALL THE
BATTERIES OUT BEFORE USING
THE POWER ADAPTER�
To Next Page
Loading...