To Next PageTo Next Page
Need help?Do you have a question about the Ashley AW2520E-P and is the answer not in the manual?
Checklist for qualified personnel to complete after installation.
Section to describe the work performed and location of appliance installation.
List of checks to verify proper installation and operation of the stove.
Lists necessary tools and materials for assembly and installation.
Instructions for assembling the blower unit to the stove.
Steps for installing the ash pan assembly into the firebox.
Guide for mounting the flue collar to the top of the stove unit.
Instructions for replacing the firebrick in the stove.
Steps to attach the air deflector to the rear of the unit.
Recommends using certified professionals for stove installation.
Guidance on optimal placement of the wood stove for efficient heat distribution.
Requirements for non-combustible floor protection beneath the heater.
Critical clearances to combustible materials around the stove and flue pipe.
Information on using an outside air intake kit for specific installations.
Steps to secure the appliance with legs to the floor.
Steps to secure the appliance mounted on a pedestal to the floor.
Specifications and requirements for the chimney connector pipe.
Explains the critical role of draft for stove performance and safety.
Guidelines for installing prefabricated metal chimneys according to manufacturer specs.
Requirements for masonry chimney installation and inspection.
Methods for safely passing chimney connectors through combustible walls.
Details alternative methods for passing chimney connectors through combustible walls.
Critical safety instruction against leaving the stove unattended while in operation.
Guidance on proper fuel types and usage for optimal stove performance.
Method to test if wood is properly dried for burning.
Warning against altering factory-set minimum burn rate controls.
Explanation of heating efficiency based on fuel values (LHV/HHV).
Procedure for initial burns to cure the high-temperature paint for durability.
How to properly load the stove with fuel for optimal performance and emissions.
Using visible smoke as an indicator of combustion efficiency.
Information about the role and maintenance of secondary air tubes.
How to operate and maintain the stove's variable-speed blower.
Explains creosote formation, accumulation, and the necessity of its removal.
Tips and practices to minimize creosote buildup in the chimney.
Procedures for safely removing and disposing of ashes from the stove.
Recommendation for using smoke and CO monitors for safety.
Instructions for cleaning and maintaining the stove's glass door.
Guidance on maintaining the door gasket for an airtight seal and efficiency.
Information on how to order replacement parts for the stove.
General
