Ashley APC1406 - User Manual

Questions and Answers

J
Joseph WelchAug 7, 2025
What to do if my Ashley APC1406 Stove fire goes out?
- A
  alvarezkellyAug 7, 2025
  If the fire goes out or the Ashley Stove shuts down, it could be due to the burnpot being out of fuel. This can happen if the hopper is empty (refill it), there is a loss of draft pressure (ensure the viewing door is closed and sealed, check for obstructions outside, and clean the exhaust system), the pressure switch connection to the firebox is blocked, the auger system is jammed, there's bridging in the hopper, or there's too much combustion air (adjust the damper to a more closed position).
M
Margaret MendozaAug 11, 2025
What to do if Ashley APC1406 doesn't start when pressing the 'ON' button?
- B
  Brandon FarmerAug 12, 2025
  If your Ashley Stove doesn't start when you press the 'ON' button, the auto-start igniter may be failing to ignite the fuel. Try these steps: * Check the pellet quality and replace any moist or damp pellets with dryer fuel. * Ensure the auto-start igniter port (behind the burnpot) isn't blocked by ash or soot. * Observe if the auto-start igniter glows during startup; if not, it may need replacement, or there could be an electrical issue (check the wiring). * Also, check for loss of draft pressure by ensuring the viewing door is sealed, outside connections are clear, and the exhaust system is clean.
S
stricklandamyAug 15, 2025
Why does my Ashley APC1406 have an orange, lazy flame and fuel build-up?
- E
  Elizabeth WarrenAug 15, 2025
  An orange, lazy flame with excessive fuel build-up in the burnpot of your Ashley Stove is likely due to a too rich air/fuel mixture. To resolve this, clean out the burnpot, ensure the cleanouts on each side of the damper are completely closed, adjust the air damper to a more open position to increase combustion air, make sure the viewing door is properly closed and sealed (adjust the door catch or replace the gasket if needed), clear any obstructions from outside connections, and clean the exhaust system as needed.
C
Cassandra MckeeAug 20, 2025
How to prevent Ashley APC1406 Stove viewing glass from blackening quickly?
- A
  Austin GuerreroAug 20, 2025
  If the viewing glass of your Ashley Stove becomes black shortly after start-up, it's likely due to insufficient combustion air or excessive moisture in the fuel. Try adjusting the air damper to a more open position or using fuel with less moisture content.
T
Thomas WatkinsAug 25, 2025
Why is corn building up and steaming in my Ashley APC1406 burnpot?
- M
  Marvin Wells MDAug 25, 2025
  If corn is building up in the burnpot of your Ashley Stove, not burning completely, and producing steam, it's likely due to insufficient combustion air or excessive moisture in the corn. Ensure there's enough combustion air by adjusting the air damper to a more open position. Also, check the moisture content of the corn and use corn with a moisture content of 11-12% or less.
M
meltonwesleyAug 28, 2025
What causes 'Black Popcorn' in my Ashley APC1406 burn chamber?
- P
  patrickbrownAug 28, 2025
  The presence of 'Black Popcorn' in the burn chamber of your Ashley Stove suggests there isn't enough combustion air or the fuel has too much moisture. Try adjusting the air damper to a more open position to increase combustion air. Also, check the moisture content in the corn; use corn with a moisture content of 11-12% or less.
M
Michael SchwartzSep 2, 2025
How to get rid of 'Clinkers' forming in my Ashley APC1406?
- L
  Linda PowersSep 2, 2025
  Clinkers forming in the burnpot and on the agitator of your Ashley Stove are due to a chemical reaction between starches in the corn and the heat. To address this, adjust the air mixture. You can also add calcium carbonate (aka chicken scratch or oyster shell). Another option is to try running a mixture of wood pellets and corn.