To Next PageTo Next Page
Need help?Do you have a question about the Ashly NE8250 and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Power per channel @ 4 ohms | 250W |
| Power per channel @ 8 ohms | 125W |
| Signal-to-Noise Ratio | >100dB |
| Input Impedance | 20k ohms balanced |
| Damping Factor | >200 |
| DSP | Yes |
| Cooling | Variable speed fan |
| Height | 3.5" (89mm) |
| Power Requirements | 100-240VAC, 50-60Hz |
Essential operational guidelines and warnings to prevent electric shock, fire hazards, and ensure safe apparatus use.
Information on optional internal DSP, AES3 input, and network audio modules.
Explanation of over current, thermal, and mains power supply protections.
Methods for controlling power states: power switch, remote standby contact closure, and software control.
Procedures for loading presets using back panel connections or remote controllers.
Overview of the Proteane software interface, including control surface, faders, meters, and link groups.
Details on managing presets, sub-presets, and configuring link groups for DSP blocks.
Details on naming, muting, and configuring input/output channels within the DSP tab.
Overview of available DSP tools including dynamics, EQ, crossovers, and delay.
Functionality of the matrix router for signal flow assignment between inputs and outputs.
Specifications for continuous average power output, line current draw, and thermal dissipation.
