• A hollow axle with a shaft (“skewer”) running through it which has an adjustable tension nut on one end and an over-center
cam
which has a nut on one end and a fitting for a hex key, lock lever or
othe
r into the hub axle (bolt- on wheel, fig. 10)
securing method for the front wheel than for the rear wheel. Discuss the wheel
secu
type of wheel securing method on your bicycle, that you know how to
sec
on the other (cam action system, fig.8 a & b)
• A hollow axle with a shaft (“skewer”) running through it
r tightening device on the other (throug
h bolt, fig. 9)
• Hex nuts or hex key bolts which are threaded on to o
Your bicycle may be equipped with a different
ring method for your bicycle with your dealer.
It is very important that you understand the
ure the wheels correctly, and that you know how to apply the correct clamping force that safely secures the wheel.
17
To Next Page
Loading...