Ask Technology HDEX0016M1 - Features

Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual
for future reference.
The products are designed to make your A/V device use more convenient, comfortable, productive
and cost-efficient.
This product will let the user experience of transmitting the HD content by wireless. The HDMI sources
over wireless kit extends high-definition video and audio to any HDTV displays up to 100 meters away.
The extender follows the TCP / IP standard Wireless Transport Protocol, so it has high transmission
rate and strong anti-interference capability. It also supports HDMI mirror output and infrared remote
control extension. The HDMI Wireless Extender is widely applicable to office presentation, lecture,
education, conference, family entertainments etc.
Our devices offer solutions for noise, space and security concerns, data center control, information
distribution, conference room presentation, school and corporate training environments.
INTRODUCTION
FEATURES：
 Contains a transmitter (TX) and a receiver (RX). The HDMI signal over wireless transmission from
the transmitter to the receiver
 The TX support one HDMI loop output, for local screen monitor
 Support HDMI resolution: 480i/576i~1080P@50/60Hz and SVGA~WUXGA
 Digital 2.4G & 5GHz dual frequency wireless A/V transmission, high transmission rate and strong
anti-interference capability
 Using an external dual - gain antennas. Full HD 1080p transmits up to 100 meters wirelessly in open
space.( May be affected by the use environment)
 Extends infrared remote to control source device from display side
 Support OSD, for informed of device status
 Simple Plug and Play. Full hardware design, no software installation required
 Support Web Configuration Interface, Simple and easy to use