To Next Page
C
Christopher WhiteAug 5, 2025
Why can't I ignite the arc on my ASKAYNAK TIG Welding System?
- KKenneth SilvaAug 5, 2025
If you're having trouble igniting the arc on your ASKAYNAK TIG Welding System, consider these potential causes and solutions: * **Spark on the HF igniting board:** Connect the welding cable to the welder’s output. * **Damaged welding cable:** Replace the welding cable. * **Unstable earth cable connection:** Check the earth cable. * **Welding cable too long:** Use an appropriate welding cable. * **Oil or dust on the workpiece:** Clean the workpiece to remove any oil or dust. * **Excessive distance between tungsten electrode and workpiece:** Reduce the distance to approximately 3mm.
General
