14
ECO WASH
WASH ONLY WHEN FULL
Save energy by not running the machine until
it is completely full.
WASH AT LOWER TEMPERATURE
If dishware is only lightly soiled you can suita-
bly reduce the temperature for Intensive, Strong
and Normal wash to 55°C, and Quick wash to
45°C.
CONNECT TO COLD WATER SUPPLY
If the machine is connected to a cold water supp-
ly, running time will be longer because heating
of the water will take longer. The longer wash-
ing phase allows you to run a programme at a
lower washing temperature and still get the same
results.
However, if you are connected to a district
heating supply it will probably be more econo-
mical to connect the dishwasher to the hot wa-
ter supply.
SELECT A PROGRAMME WITHOUT DRYING HEAT
If you choose an Intensive, Strong wash or Nor-
mal wash programme without drying heat, the
machine will dry using the fan only. When wash-
ing is completed, leave the door ajar to speed
up the drying process by allowing moist air to
escape.
AVOID RINSING BEFORE WASHING
Thanks to the Super Cleaning System
™
, you do
not need to rinse your dishes under running
water before putting them in the dishwasher.
The machine always starts the main wash with
clean water and a clean machine.
USE AN ENVIRONMENT-FRIENDLY DETERGENT
Study the environment information on the packet.
To Next Page
Loading...
Need help?
General
