21
Spray arms
Spray-arm jets and bearings may sometimes
become clogged. Screw off the nut and take off
the washer on top of the spray arm and lift off
the arm. Poke out any obstructions with a ske-
wer or other suitable pointed tool. The spray-
arm jets face downwards.
Door
To clean the edge round the door, use only a
damp rag and possibly a little detergent. To pre-
vent penetration of water into the door lock
and electrical components, do not use a spray
of any kind.
WARNING
Do not use a spray of any kind close to the
door lock.
To Next Page
Loading...
