17
Spray arms
Spray-arm jets and bearings may sometimes be-
come clogged. Screw off the nut and take off
the washer on top of the spray arm and lift off
the arm. Poke out any obstructions with a ske-
wer or other suitable pointed tool. The spray-
arm jets face downwards.
Door
To clean the edge round the door, use only a
damp rag and possibly a little detergent. To pre-
vent penetration of water into the door lock and
electrical components, do not use a spray of any
kind.
WARNING
Do not use a spray of any kind close to the door
lock.
To Next Page
Loading...
