Transport protection for the door
Do not forget to remove the transport protection for the door when unpacking the dishwasher.
Trim kit
The dishwasher is equipped with a trim kit to fit the 24'' (609 mm) cutout standard. If a European
width of 23 5/8'' (600 mm) is required, remove the trim kit.
Adjust the trim kit
The trim kit can be adjusted backward to level the dishwasher tub.
ADA compliance
If a height of 32 1/4'' (819 mm) is required for ADA compliance, remove the upper trim kit. Also lower
the trim kit on the sides.
39
Installation instructions
To Next Page
Loading...
