OptionsSettings
Super rinse adds two extra rinses.On/OffSuper rinse8.
Activated in the following programs:
Normal wash
ECO wash
Sanitation wash
Plastic wash
Lower half
Upper half
Activate the setting High temperature to improve the dishwashing
results. Energy consumption is slightly increased.
On/OffHigh temperature9.
Activated in the following programs:
Normal wash
ECO wash
Sanitation wash
Plastic wash
Lower half
Upper half
Adjusting the water softener. Select a setting depending on the
hardness of the water supply. It is important that this setting is
correct!
0/1/2/3/4/5/6/7/8/9Water hardness10.
Recommended
setting
French water
hardness scale
German water
hardness scale
00-9°fH0-5°dH
110-14°fH6-8°dH
215-20°fH9-11°dH
321-25°fH12-14°dH
426-34°fH15-19°dH
535-43°fH22-24°dH
644-52°fH25-29°dH
753-70°fH30-39°dH
871-88°fH40-49°dH
989°fH50°dH
Do not forget to put salt in the salt compartment after you have
set the water softener to 1 - 9.
For a water supply with a hardness under 6°dH (9°fH), select 0.
The water softener is deactivated and no salt is needed.
To exit the dishwasher's Settings menu, select Exit and confirm
your selection with the mode selector .
Exit
14
To Next Page
Loading...
