Asko DBI663IS User Manual

Before washing for the
first time
1. Checking water hardness
In order to achieve good dishwashing results, the dishwasher needs
soft water (water with low mineral content). Hard water leaves a white
coating on dishes and the dishwasher.
Water hardness is specified using the German water hardness scale
(°dH) or the French water hardness scale (°fH).
A water supply with a water hardness in excess of 6°dH (9°fH) must
be softened. This is done automatically with the aid of the built-in water
softener. In order for the water softener to function optimally, it must
be adjusted to the hardness of the water supply. Once you have
adjusted the water softener, use detergent and rinse aid doses suitable
for soft water.
Contact the local water utility to check the water hardness in your area.
Make a note of the water hardness:____________
Recommended
setting
French water
hardness scale
German water
hardness scale
00-9°fH0-5°dH
110-14°fH6-8°dH
215-20°fH9-11°dH
321-25°fH12-14°dH
426-34°fH15-19°dH
535-43°fH22-24°dH
644-52°fH25-29°dH
753-70°fH30-39°dH
871-88°fH40-49°dH
989°fH50°dH
If the water hardness exceeds 50°dH (89°fH), we recommend
connecting an external water softener.
WARNING!
Hard water leaves a white coating on dishes and inside the
dishwasher. It is therefore important that you select the right setting
for the water softener! See Water hardness.
Never run the dishwasher with an empty salt compartment if the
water supply has a water hardness in excess of 6°dH (9°fH).
2. Basic settings
Open the door and press the main power switch.
"Welcome to your new ASKO. This is a first time set up." is shown
on the display. It is important that you choose the right settings to
ensure good dishwashing results.
Confirm setting
Select setting
Main power switch
Settings
Language1.
Select the language to be shown on the display.
Rinse aid 0/1/2/3/4/5/TAB3.
Use rinse aid to improve wash and dry times. Also use rinse aid to
achieve clear and spotless results.
Select rinse aid dosage. The rinse aid dispenser can be adjusted
between 0 (Off) and 5 (High dosage).
When using an all-in-one detergent that contains rinse aid, select
the TAB setting. Read more about all-in-one detergent in the chapter
Using the dishwasher.
Pre-selected at factory: 5
Add rinse aid
Press to open
1. Open the rinse aid compartment lid.
2. Carefully top up with rinse aid to the level marked max.
3. Wipe up any spilled rinse aid around the compartment.
4. Close the lid firmly.
4

Asko DBI663IS Specifications

General

Style	built in
Color	stainless steel
Load Capacity	16 place settings
Number of Cycles	normal wash, eco wash, hygiene wash, time program, plastic wash, rinse and hold, sanitation wash, upper half, lower half, crystal glass, self-cleaning; 11
Drying Type	turbo drying; vented
Noise level	44 dba
Control Type	touchpad
Delay Start	yes
Spray Arms	3
Water Filter	yes
Leak Protection	no
Water Softener	no
Food Disposer	no
Sanitize Settings	no
Half Load	yes
Wi-Fi	no
Smart Home	no
Remote Control	no
Voltage	120 volts
Frequency	60 hz
Current	15 a

Weight and Dimensions

Depth	22 inch
Height	32 11/16 inch
Width	23 7/8 inch
Net Weight	115 lbs.