Before washing for the
first time
1. Checking water hardness
Contact the local water utility to check the water hardness in your area.
This is important to determine how much detergent and rinse aid to
use.
In general, more rinse aid and detergent are needed for hard water.
2. Basic settings
To switch on the dishwasher, press and hold the main power switch
until the display lights up.
"Welcome to your new ASKO. This is a first time set up." is shown
on the display. It is important that you choose the right settings to
ensure good dishwashing results.
Confirm setting
Select setting
Main power switch
Settings
Language1
Select the language to be shown on the display.
Rinse aid 0/1/2/3/4/52
Use rinse aid to improve wash and dry times. Also use rinse aid to
achieve clear and spotless results.
Select rinse aid dosage. The rinse aid dispenser can be adjusted
between 0 (Off) and 5 (High dosage).
Pre-selected at factory: 5
To change the chosen setting, see the chapter Settings.
4
To Next Page
Loading...
Need help?
General
