EasyManua.ls Logo

Asko DC7573 - Assembly Area

Asko DC7573
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If the dryer cabinet is to be connected to the
exhaust air ventilation this must be available
in the premises.
An earthed power outlet must be available
within 2 m of the top section of the dryer
cabinet. The dryer cabinet has a 2 m long
earthed cable with plug connected at the top.
The power outlet must be positioned so that
an extension cord is not necessary.
The power socket should be simple to reach
once the dryer cabinet has been installed.
Observe this even when the dryer cabinet is
installed in an in-built cabinet or the like. See
the section ‘Electrical installation’.
The floor where the cabinet is to be positioned
must support a weight of about 60 kg.
The floor must be flat with a drop of max 2,5
cm below the cabinet.
The dryer cabinet is only intended for
placement indoors with a temperature over 0
°C.
The dryer cabinet must not be placed in
environments where high-pressure washers
are used for cleaning.
595
127
295
615
600
O102
DC7573
1695-1720
DC7583
1835-1860
7
Assembly area

Related product manuals